TRAINING OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

TRAINING OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

Training Oil Surface Production

Training Operasi Produksi

The job of a production facility is to separate the well stream into three components, typically called ‘phases’ (gas, oil, and water), and process these phases into some marketable product or dispose of them in an environmentally acceptable manner. Water often flows into a well along with oil and gas. All these fluids are collected by surface equipment for separation into gas, oil, and water fractions for storage and distribution. The water, which contains salt and other minerals, is usually injected into formations that are well separated from freshwater aquifers close to the surface. In many cases it is put back into the formation from which it came. At times, produced water forms an emulsion with the oil or a solid hydrate compound with the gas. In those cases, specially designed treaters are used to separate the three components. The clean crude oil is sent to storage at near atmospheric pressure. Natural gas is usually piped directly to a central processing plant (called a gasoline plant),
where the remaining liquids (LOGs) are removed before it is fed to the consumer pipeline.
Therefore, The facility must provide well testing and measurement so that gas, oil, and water can be properly allocated to each well. To separate the well stream into three components as mention above, engineer must known well about separator. Separator will utilize the force of gravity to separate gas and oil mixtures. Therefore, separator is one of crucial surface facility. Other than separator, there are many other surface facility that crucial for oil and gas production.

However, while tending to this facility, some problem must be arising. The problem is circulating around pressure cumulative production, hydrate formation, sour gas production, corrosion, and sulfur deposition. Hence, we need to know how to solve this problem and also how to maintain surface facility so that the oil production will proceed well. This practical approach course is designed to provide a comprehensive understanding of Surface Production Facility, Process, Operation and Maintenance. It will be presented in order to fulfill the needs of all technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance, you should participate in this course.

COURSE CONTENT :

* Surface Production Processing and Flow Diagram
* Production Separators, Flowlines, Heater-Treater and Storage Tanks
* Gas Gathering & Compression
* Gas Processing and Sour Gas Treating
* Gas Pipeline Problems and Troubleshooting

Active participation is encouraged through case studies and examples. It is possible to tailor for specific goal, upon request. The training will be delivered in the form of classroom exposition, case studies and open discussion.

Who Will You Meet ?

All technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance.

What Will You Get After Completing This Course? After completion, participants will:

Understand why oil & gas must be processed in near well surface production facility, how the process is carried out, what equipment and components are needed, how each equipment works, and what are the goals to be achieved in each stage, in both technical and economical point of views.
Better classify requirements for each separation process and specification of vessels, columns, piping, valves, pump, compressor and related devices used in surface operations and improve knowledge on safety, inspection, maintenance and troubleshooting of the whole system.

METODE TRAINING

1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games

Jadwal Diorama Training Tahun 2026

• Januari : 20-21 Januari 2026
• Februari : 24-25 Februari 2026
• Maret : 05-06 Maret 2026
• April : 23-24 April 2026
• Mei : 19-20 May 2026
• Juni : 23-24 Juni 2026
• Juli : 23-24 Juli 2026
• Agustus : 27-28 Agustus 2026
• September : 15-16 September 2026
• Oktober : 20-21 October 2026
• November : 17-18 November 2026
• Desember : 15-16 December 2026

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan. Sebelum melakukan booking tiket perjalanan maupun hotel mohon untuk menghubungi marketing kami terlebih dahulu. Kesalahan pemesanan tiket terkait jadwal tanpa surat konfirmasi (Confirmation Letter) bukan merupakan tanggung jawab tim Diorama Training.

LOKASI PELATIHAN

REGULER TRAINING

• Yogyakarta, Hotel Fortuna Grande Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Kemang  La Codefin (6.500.000 IDR / participant)
• Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
• Surabaya, Hotel Neo Gubeng (7.500.000 IDR / participant)

ONLINE TRAINING VIA ZOOM

INVESTASI PELATIHAN

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Benefit Apa Saja yang Didapatkan Peserta?

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan (By Request)
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or backpack (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2x Coffee Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

FAQ tentang CVDIOR.CO.ID

P : Berapa minimal running pelatihan ini ?
J : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta

P : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
J : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien

P : Dimana saja pelatihan biasanya di selenggarakan?
J : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia

P : Apakah bisa diselenggarakan selain di kota lain?
J : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas

P : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
J : Bisa diselenggarakan secara IHT di Perusahaan klien

P : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
J : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.

Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk Melakukan Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftarkan Pelatihan, Dapatkan Promo Menarik Bulan Ini.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running