
Power System Stability And Control
Power System Stability And Control
Description
This seminar will provide a comprehensive overview of power system stability and control problems. This includes the basic concepts, physical aspects of the phenomena, methods of analysis, examples of major power grid blackouts due to different categories of system instability, challenges to the secure operation of present-day power systems, and comprehensive approach to enhancing system security. Power System Stability and Control seminar will also cover in detail various technologies available today to prevent voltage instability on power systems, including static var compensators and inverter-based dynamic compensators. Case studies of actual voltage instability problems and equipment solutions will also be presented. The impact of wind generation on system voltage stability, interconnect requirements, as well as reactive power and voltage control equipment solutions will also be covered.
Objectives
After completing this programme, learners will better understand and be able to:
•Learn the Fundamentals of motors, drives and automation systems
•Update Yourself on the Latest Advancements in VFDs
•Learn the Latest Improvements in Motor Efficiency
•Practical Approaches and Problem-Solving Solutions
•Learn How to Solve Common Motor and VFD Problems
•Learn Practical Troubleshooting Techniques
•Learn the Automation Considerations Between Motors, Drives and PLCs
•Reduce Reliance on Outside Service Companies
•Make Sure Your Equipment is Up and Running
Participant
Utility engineers, consultants (especially those involved with IPP/DG design), equipment/control engineers, generator packager and manufacturer engineers as well as others who specify protective relays and develop settings for these devices.
Outline
1.Introduction to Power System Stability
2.Review of Equipment Characteristics and Modelling
3.Control of Active Power and Frequency:
• Fundamentals of frequency control
•Composite regulating characteristics of power systems
• Automatic generation control
•Under-frequency load shedding
4.Control of Reactive Power and Voltage
•Control objectives
•Production and absorption of reactive power
•Methods of voltage control
•Principles of reactive compensation in transmission systems
•Static and dynamic compensators
5.Transient (angle) Stability
•An elementary view of the transient stability problem
•Simulation of power system dynamic response
•Numerical integration methods
•Performance of protective relaying
•Transient stability enhancement
•Case studies
•Examples of major system blackouts due to transient instability
6.Small-Signal (angle) Stability
7.Subsynchronous Oscillations
•Steam turbine generator torsional characteristics
•Torsional interaction with power system controls: PSS, HVDC converter controls
•Subsynchronous resonance
•Impact of network-switching disturbances
8.Voltage Stability
•Description of the phenomenon
•Factors influencing voltage stability
•Methods of analysis
•Examples of major system disturbances due to voltage instability
•Prevention of voltage instability
•Technologies for prevention of voltage instability :
1.Static VAR compensators
2.Large STATCOMs
3.Smaller inverter-based dynamic compensators
• Case studies and illustrative examples
9.Frequency Stability
• Nature and description of frequency stability problems
• Examples of system disturbances caused by frequency instability
•Analysis of frequency stability problems
•Case studies
•Mitigation of frequency stability problems
10.Wind Turbine Generators
11.Major Power Grid Blackouts in 2003
12.Comprehensive Approach to Power System Security
METODE TRAINING
1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. GamesJadwal Training Update di Tahun 2023
Training Bulan Januari : 10-11 Januari 2023
Training Bulan Februari : 7-8 Februari 2023
Training Bulan Maret : 7-8 Maret 2023
Training Bulan April : 18-19 April 2023
Training Bulan Mei : 16-17 Mei 2023
Training Bulan Juni : 6-7 Juni 2023
Training Bulan Juli : 11-12 Juli 2023
Training Bulan Agustus : 22-23 Agustus 2023
Training Bulan September : 12-13 September 2023
Training Bulan Oktober : 10-11 Oktober 2023
Training Bulan November : 7-8 November 2023
Training Bulan Desember : 5-6 Desember 2023Jadwal tersebut juga dapat disesuaikan dengan kebutuhan calon peserta
LOKASI PELATIHAN :
- Yogyakarta, Hotel Dafam Malioboro (7.250.000 IDR / participant)
- Jakarta, Hotel Amaris Tendean (7.750.000 IDR / participant)
- Bandung, Hotel Golden Flower (7.750.000 IDR / participant)
- Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)
- Lombok, Hotel Jayakarta (8.750.000 IDR / participant)
INVESTASI TRAINING
Investasi Pelatihan tahun 2022 ini :
Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di Diorama untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Transportasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.
Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running