PELATIHAN ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS DAN GEOTHERMAL INDUSTRY

PELATIHAN ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS DAN GEOTHERMAL INDUSTRY

ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS & GEOTHERMAL INDUSTRY

PELATIHAN ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS & GEOTHERMAL INDUSTRY

Deskripsi

With today’s growing awareness of social responsibility and public interest, environmental concerns are receiving the highest priority in government regulations. The future of our environment – and the industry – depends on meeting the challenge of maintaining a balance between acceptable environmental practices and economically efficient operating procedures.

These growing concerns have imposed a burden on the oil and gas drilling industry to implement program and technique to not only minimize the potential impact that oil and gas operations can have on the environment but also remediate those impacts, whether they occurred through accident or negligence.

The mandate to the oil and gas industry of implementing environmentally safe drilling technique has proven to be not only a financial challenge but also an administrative challenge.

Regulations governing the oil industry with regard to the environment continue to change, yet many firm that recognize they no longer can conduct their operations as they did in “the good old days” have had to employ full-time environmental professional to ensure that all operations conducted in the field are in compliance with the changing local and state regulations. This increase scrutiny also has prompted drilling contractor to think of ways to minimize the impact their operations have on the environment rather than just ways of how to remediate the impact ones it occurs.

This training is intended to introduce technique that will assist oil and gas professional in minimizing the impact that drilling operations have on the environment.

Much of what is contained herein reflects the trainer’s industry experience, with an emphasis on-shore and wetlands drilling operations. At the same time, it must be said that the preferred practices and recommendation outline in this program can serve as useful guidelines for operator and drilling contractor elsewhere in the world, notably in environmentally sensitive areas of developing countries that have little historical regulatory precedents.

This 4 day course covers all aspects of drilling and deals with both theory and application. It is particularly valuable for their career in drilling operation.

Emphasis is on the system and technique that are commonly used in the drilling industry, regulations and environment protection basics, from site assessment to reclamation. The curriculum is designed to provide the information needed as a drilling waste professional, regardless of skill level.

This course is a must attend for all individuals with overall environmental compliance responsibilities. This course provides the tools needed for the job.

Course Objective

Upon completion of the training, the participants will have improvement in:
* Knowledge on hazardous and non-hazardous drilling wastes: generation, characteristics and impacts on occupational safety, health and environment.
* Understanding environmental management principles including waste minimization or cleaner production
* Practical knowledge on the proper identification, segregation, containerization, temporary storage
* Transportation, treatment and safe disposal of hazardous and non-hazardous wastes of drilling activities
* Translating the principles and knowledge on environmental management into strategic problems solving

Who Should Attend?

Managers, supervisors, environmental coordinators and/or engineer, health and safety coordinators, and consultants all benefit from this training. Many of our participants attend because they have responsibility to back up the designated environmental coordinator at the facility.

Superintendent and Supervisor of drilling operational function, Waste Management Team, Transportation and Logistics Division as well as Health, Safety & Environmental senior staff.

The recommended participant may include key personnel whose activities are most likely to impact the environment and or producing drilling wastes.

Course Outline

1. Drilling and the environment
* a. basic concepts
* b. environmental regulations: existing and trends
* c. ISO-14001 EMS requirements vs environmental impact.

2. Preventing Spills
* a. spill prevention – control and countermeasure plan
* b. onshore facility operations
* c. preventive maintenance

3. Site Assessments
* a. phase I Environmental Site Assessment

4. Sampling
* a. sampling techniques
* b. sample analysis
* c. data interpretation

5. Well site Determination
* a. Wetlands
* b. Wetlands permitting
* c. EIS (Environmental Impact Statement)s and EA (Environmental Assessment)s

6. Mitigation

7. Drilling Techniques
* a. New approaches
* b. Operating concerns

8. Drilling Wastes
* a. Non-hazardous oil field waste
* b. Drilling fluids
* c. Drill cuttings
* d. Wash down fluids
* e. Sanitary waste
* f. Storm water runoff
* g. Hazardous wastes
* h. NORM (naturally occurring radioactive materials)

9. Wastes Handling and Minimization
* a. Reserve pits
* b. Land farming
* c. Trenching and burying
* d. Discharge
* e. Reuse
* f. Subsurface injection
* g. Slurrification
* h. Haul-off
* i. Closed-loop system
* j. Overview

10. Remediation

11. Drilling and the future
* a. Balancing act
* b. Industry’s challenge

12. Case study – lesson learn

METODE TRAINING

1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games

Jadwal Diorama Training Tahun 2026

• Januari : 20-21 Januari 2026
• Februari : 24-25 Februari 2026
• Maret : 05-06 Maret 2026
• April : 23-24 April 2026
• Mei : 19-20 May 2026
• Juni : 23-24 Juni 2026
• Juli : 23-24 Juli 2026
• Agustus : 27-28 Agustus 2026
• September : 15-16 September 2026
• Oktober : 20-21 October 2026
• November : 17-18 November 2026
• Desember : 15-16 December 2026

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan. Sebelum melakukan booking tiket perjalanan maupun hotel mohon untuk menghubungi marketing kami terlebih dahulu. Kesalahan pemesanan tiket terkait jadwal tanpa surat konfirmasi (Confirmation Letter) bukan merupakan tanggung jawab tim Diorama Training.

LOKASI PELATIHAN

REGULER TRAINING

• Yogyakarta, Hotel Fortuna Grande Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Kemang  La Codefin (6.500.000 IDR / participant)
• Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
• Surabaya, Hotel Neo Gubeng (7.500.000 IDR / participant)

ONLINE TRAINING VIA ZOOM

INVESTASI PELATIHAN

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Benefit Apa Saja yang Didapatkan Peserta?

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan (By Request)
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or backpack (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2x Coffee Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

FAQ tentang CVDIOR.CO.ID

P : Berapa minimal running pelatihan ini ?
J : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta

P : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
J : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien

P : Dimana saja pelatihan biasanya di selenggarakan?
J : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia

P : Apakah bisa diselenggarakan selain di kota lain?
J : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas

P : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
J : Bisa diselenggarakan secara IHT di Perusahaan klien

P : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
J : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.

Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk Melakukan Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftarkan Pelatihan, Dapatkan Promo Menarik Bulan Ini.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running