TRAINING ULTRASONIC GAS FLOW METER

TRAINING ULTRASONIC GAS FLOW METER

Training Gas Flow Meter

Training Ultrasonic Meter

INTRODUCTION :

Although the ultrasonic meter has already been patented in 1928, its accuracy was very poor due to insufficient electronic and signal processing technology at that time. Digital signal processing has rapidly developed over the past 30 years which is a result of the significant advances in digital computer technology and integrated-circuit fabrication. This rapid development on digital electronic has brought significant improvement on the accuracy of ultrasonic transit time gas flowmeter. This type of meter is commercially used for gas custody transfer application on 1994.
The American Gas Association (AGA) has issued a report on measurement of gas by multi-path ultrasonic meters. The report provides performance-based specifications and recommended practices for industrial use of ultrasonic metering.
In Indonesia, MIGAS approved the ultrasonic meter for custody transfer application in 1998. On January 30, 2001 the first multipath ultrasonic gas metering system in Indonesia was officially in operation as allocation meter at Anoa EGP project in West Natuna.

Unfortunately engineer/technicians in the field do not have enough knowledge and experienced about this kind of gas flowmeter. They need intensive training to know the basic theory and how the ultrasonic meter works. The Ultrasonic Gas Flow Meter Course will provide participants with comprehensive information on ultrasonic gas flowmeter technology. During this-5 days course the participants will receive information on wave theory, acoustic and ultrasonic waves, ultrasonic measurement system, various type of ultrasonic flowmeter, the principle operation of transit time ultrasonic gas flowmeter and its calibration. On the last day the participants will visit and carry out practical work at Ultrasonic Laboratory, Engineering Physics Department, Bandung Institute of Technology (ITB).

TRAINING MATERIAL OUTLINE :

* Wave Theory

* Sinusoidal Wave
* Wave Equation
* Kind of Waves

Acoustic Wave
* Acoustic Impedance
* Acoustic Intensity
* Decibel Scale
* Wave Reflection and Transmission
* Wave Refraction and Radiation
* Wave Atenuation

Ultrasonic Wave
* Types of Ultrasonic Waves
* Wave Propagation and Radiation
* Types of Ultrasonic Transducers
* Ultrasonic Signals Waveform

General Ultrasonic System
* Transducer Unit
* Transmitter and Receiver Unit
* Measuring and Analyzer Unit
* Processing Unit
* Display Unit

Ultrasonic Flowmeter
* Beam Drift Method
* Doppler Method
* Vortex Shedding Method
* Contra Propagating Method
* Cross Correlation Method

Ultrasonic Gas Flowmeter
* Block Diagram
* Principles of Operation
* Singlepath Ultrasonic Gas Flowmeter
* Multipath Ultrasonic Gas Flowmeter
* Energy Measurement using USM and Gas Chromatograph

Maintenance of Ultrasonic Gas Flowmeter
* Internal and External Diagnostics
* Gain
* Signal Quality (Transducer Performance)
* Signal to Noise Ratio
* Velocity Profile
* Speed of Sound
* Turbulence

Calibration of Ultrasonic Gas Flowmeter
* Dry and Wet Calibration
* Pipeline Based Calibration System
* Pressurized Loop Calibration System

Laboratory Visit and Practical Works (at Ultrasonic Laboratory ITB)

WHO SHOULD ATTEND?

* Operation Manager/Engineers
* Process/Production Engineers and Technician
* Production Supervisors
* Instrument Technician
* Maintenance Manager/Engineers
* Government Agencies

METODE TRAINING

1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games

Jadwal Training Update di Tahun 2023

Training Bulan Januari : 10-11 Januari 2023
Training Bulan Februari : 7-8 Februari 2023
Training Bulan Maret : 7-8 Maret 2023
Training Bulan April : 18-19 April 2023
Training Bulan Mei : 16-17 Mei 2023
Training Bulan Juni : 6-7 Juni 2023
Training Bulan Juli : 11-12 Juli 2023
Training Bulan Agustus : 22-23 Agustus 2023
Training Bulan September : 12-13 September 2023
Training Bulan Oktober : 10-11 Oktober 2023
Training Bulan November : 7-8 November 2023
Training Bulan Desember : 5-6 Desember 2023

Jadwal tersebut juga dapat disesuaikan dengan kebutuhan calon peserta

LOKASI PELATIHAN  :

• Yogyakarta, Hotel Dafam Malioboro (7.250.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (7.750.000 IDR / participant)
• Bandung, Hotel Golden Flower (7.750.000 IDR / participant)
• Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (8.750.000 IDR / participant)

INVESTASI TRAINING

Investasi Pelatihan tahun 2022 ini :

Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Diorama untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan .
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running