PIPELINE DESIGN AND INTREGRITY ENGINEERING

Desain Pipa dan Teknik Integrasi

Description

Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, and Repair describes the fundamental steps to any successful piping and pipeline engineering project, whether it’s routine maintenance or a multi-million dollar project new. Explores the understanding of the qualitative details, calculations, and techniques are essential in supporting competent decisions. He pairs coverage of real-world practice with the technical principles that underlie the material, design, construction, inspection, testing, and maintenance.

Participants will understand the seven principles that will help establish a balance between production, cost, security and integrity of piping and piping systems.

Through this course participants learn about the coverage of codes and standards, design analysis, welding and inspection, corrosion mechanisms, fitness-for-service and failure analysis, and an overview of valve selection and application. It features the technical basis of piping and pipeline code design rules for normal operating conditions and occasional loads and addresses the basic principles of materials, design, fabrication, testing and corrosion, and its effect on the integrity of the system.

Objective

1. The Participant will gain an in-depth knowledge of pipe and fitting material specifications, manufacturing, fabrication process and their influence on mechanical properties of strength and toughness, to help in material selection and failure analysis
2. Understand the technical background to the design formulas, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation
3. Practical understanding of piping and pipeline mode of failure, corrosion mechanisms, how to recognize them, classify them and resolve them
4. The participant will learn risk assessment for piping & pipeline i.e. probability of failure and their consequences if failures occur
5. The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage

Course Content

1. Introduction

• History of Pipeline Technology
• ASME Codes and Standards
• API Standards
• NACA, MSS-SP, PFI Standards
• Fundamentals of Maintenance and Integrity

2. Materials Selection

• Practical Aspects of Metallurgical Properties
• Chemistry and Material Test Reports
• Linepipe manufacturing
• Fabrication and Fittings specification
• Mechanical Properties: Strength and Toughness
• Material selection technique

3. Welding

• Overview of Pipe and Pipeline Welding Practice
• API 1104 and ASME IX Requirement
• Welding In-service: Challenge and Solutions

4. Strength Integrity for Sustained Loads

• Operating and Design Pressure
• How to Establish the System Design Pressure
• Introduction to Pressure Relief Valves
• Pipe and Pipeline Sizing Formula with Applications
• Rules of Good Practice in layout
• Pump and Compressor Piping
• How to Support a piping System
• Review of Support Types and their Application
• Lesson learned from Poor Support Practices
• Temperature Effects
• Flexibility Layout Analysis
• Temperature Transients and Fatigue Damage
• Vibration In Service
• Mechanical and Hydraulic Induced Vibration in Piping
• How to Measure Analyze Resolve Vibration

5. Strength Integrity for Occasional Loads

• Pressure Transients
• Recognizing and Solving Liquid Hammer
• Pump Station Transients
• Study of Pipeline Failures Due to Transient
• Two-Phase Liquid -Vapor Transients
• Two-Phase Liquid-Gas Transients
• Gas Discharge Transients
• Buried Pipe
• Soil Loads
• Surface Loads
• Expansion of Buried Pipe
• Soil settlement
• Pipeline Failures
• Study Case Histories
• Understanding Why Failures Occur and How to Avoid Them

6. Corrosion Assessment and Protection

• Introduction to Practical Corrosion
• Classification of Corrosion Mechanisms
• General Wall Thinning
• Local Corrosion: Galvanic Effects
• Crevice Corrosion
• Pitting Corrosion
• Environmental Effects
• Hydrogen and H2S Effects
• Microbiological Corrosion
• Corrosion Protection
• Cathodic Protection Overview

7. Corrosion Assessment and Protection

• Introduction to Practical Corrosion
• Classification of Corrosion Mechanisms
• General Wall Thinning
• Local Corrosion: Galvanic Effects
• Crevice Corrosion
• Pitting Corrosion
• Environmental Effects
• Hydrogen and H2S Effects
• Microbiological Corrosion
• Corrosion Protection
• Cathodic Protection

8. Risk Assessment Overview

• Introduction to risk assessment
• Risk Criteria
• Probability of failure
• Third party damage
• Corrosion aspects
• Design aspects
• Incorrect operation
• Consequence of failure
• Product hazard
• Spill assessment
• Dispersion calculation
• Receptors
• Risk Representation

9. Maintenance & repair

• Flange and Mechanical Joints
• Overview of Different Types of Flanges and Application
• Causes of Flange Leaks and How to Resolve
• Case Study of Flange Failure
• Assembly of Flange Joints and Leak Tightness
• Pressure and Leak Testing
• The Difference Between Leak Testing and Pressure Testing
• Review of Difference Testing Techniques
• The Purpose of Hydro test
• How to Conduct a Hydro test
• Pipeline and Piping Systems Testing
• Pneumatic Testing
• Repair Techniques
• The New ASME Repair Standards
• The Fundamentals of Repair package
• Pipe and Component Replacement
• Grinding and welding
• Welded Sleeve: Type A and B

METODE TRAINING

1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games

Jadwal Diorama Training Tahun 2026

• Januari : 20-21 Januari 2026
• Februari : 24-25 Februari 2026
• Maret : 05-06 Maret 2026
• April : 23-24 April 2026
• Mei : 19-20 May 2026
• Juni : 23-24 Juni 2026
• Juli : 23-24 Juli 2026
• Agustus : 27-28 Agustus 2026
• September : 15-16 September 2026
• Oktober : 20-21 October 2026
• November : 17-18 November 2026
• Desember : 15-16 December 2026

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan. Sebelum melakukan booking tiket perjalanan maupun hotel mohon untuk menghubungi marketing kami terlebih dahulu. Kesalahan pemesanan tiket terkait jadwal tanpa surat konfirmasi (Confirmation Letter) bukan merupakan tanggung jawab tim Diorama Training.

LOKASI PELATIHAN

REGULER TRAINING

• Yogyakarta, Hotel Fortuna Grande Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Kemang  La Codefin (6.500.000 IDR / participant)
• Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
• Surabaya, Hotel Neo Gubeng (7.500.000 IDR / participant)

ONLINE TRAINING VIA ZOOM

INVESTASI PELATIHAN

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Benefit Apa Saja yang Didapatkan Peserta?

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan (By Request)
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or backpack (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2x Coffee Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

FAQ tentang CVDIOR.CO.ID

P : Berapa minimal running pelatihan ini ?
J : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta

P : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
J : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien

P : Dimana saja pelatihan biasanya di selenggarakan?
J : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia

P : Apakah bisa diselenggarakan selain di kota lain?
J : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas

P : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
J : Bisa diselenggarakan secara IHT di Perusahaan klien

P : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
J : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.

Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk Melakukan Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftarkan Pelatihan, Dapatkan Promo Menarik Bulan Ini.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running