COURSE DESCRIPTION AC/ DC Electrical Motor

DESCRIPTION AC/ DC Electrical Motor TRAINING

PELATIHAN MOTOR AC/DC

This course covers AC/DC electrical motor drives for speed/position control. It presents an integrated discussion of AC/DC electric motor, power electronics, and control systems. Applications of electric drives can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of AC/DC electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot AC/DC electrical motors drives. The course focuses on the dc and ac motor from solid state converters for better torque and speed response. Advanced control techniques are applied to optimize the performance of dc/ac motor drives. Since majority of modern drives are dc/ac motor drives, the course centers around the control of dc/ac motor drives.

Participant will gain a fundamental understanding of the AC/DC electrical motor drives, installation, operation and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life. Finally, control aspects of some special motors, such as permanent magnet synchronous motor, brushless dc motor, switched reluctance motor, etc. Computer simulations are used for understanding AC/DC electric motor, power-electronics based converters and the design of control systems.

Tujuan

• Understand the AC/DC electrical motor drives basic principles
• Describe the Electric Drive systems and various applications such as flexible production systems, industries, transportation, robotics and process control.
• Understand the principle on AC/DC electrical motor.
• Understand the basic principles of power electronics in drives using switch-mode converters and pulse width modulation.
• Design torque, speed, and position controllers of motor drives.
• Explain operating principles, major components and control logic used with AC and DC drive speed controls.
• Learn the stepper motors and switched-reluctance motor drives.
• Get an appreciation of power quality issues in powering electric drives.
• Compare the advantages and disadvantages of AC DC drives based on application.
• Discuss the advantages of using variable speed drives in constant torque and variable horsepower loads.
• Understand the Troubleshoot of AC/DC electrical motor drives.

Materi Training

• Introduction to AC/DC electrical motor drives.
• Basic principles of electro-mechanical energy conversion (Efficiency, torque, inertia, horsepower/power factor, Torque-speed
• curves)
• Principles of AC electrical motor ( operating system and control )
• Principles of DC electrical motor ( operating system and control )
• Basic understanding of switch-mode power electronic converters in electric drives.
• DC-motor drives and electronically-commutated motor drives.
• DC motor drives (Speed-torque characteristics DC shunt, series, Speed and position control methods )
• Designing feedback controllers for motor drives.
• Introduction to AC machines.( Induction-synchronous motors )
• Induction-motor drives: speed control.
• Vector control of induction-motor drives.
• Reluctance drives: stepper-motor and switched-reluctance drives.
• Energy efficiency of electric drives and inverter-motor interactions.
• Powering electric drives: power quality issues.
• Ancillary issues in drives: sensors and controllers.
• Converters and control ( Phase controlled converters, Four quadrant operation
• Choppers, AC to DC converters)
• Inverters and PWM techniques
• Voltage source inverters, current source inverters and PWM techniques
• Power Quality issue: Harmonic elimination
• Advance induction motor control (constant flux speed control ,vector control )
• Troubleshoot AC/DC electrical motor drives

METODE TRAINING

1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games

Jadwal Diorama Training Tahun 2026

• Januari : 20-21 Januari 2026
• Februari : 24-25 Februari 2026
• Maret : 05-06 Maret 2026
• April : 23-24 April 2026
• Mei : 19-20 May 2026
• Juni : 23-24 Juni 2026
• Juli : 23-24 Juli 2026
• Agustus : 27-28 Agustus 2026
• September : 15-16 September 2026
• Oktober : 20-21 October 2026
• November : 17-18 November 2026
• Desember : 15-16 December 2026

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan. Sebelum melakukan booking tiket perjalanan maupun hotel mohon untuk menghubungi marketing kami terlebih dahulu. Kesalahan pemesanan tiket terkait jadwal tanpa surat konfirmasi (Confirmation Letter) bukan merupakan tanggung jawab tim Diorama Training.

LOKASI PELATIHAN

REGULER TRAINING

• Yogyakarta, Hotel Fortuna Grande Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Kemang  La Codefin (6.500.000 IDR / participant)
• Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
• Surabaya, Hotel Neo Gubeng (7.500.000 IDR / participant)

ONLINE TRAINING VIA ZOOM

INVESTASI PELATIHAN

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Benefit Apa Saja yang Didapatkan Peserta?

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan (By Request)
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or backpack (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2x Coffee Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

FAQ tentang CVDIOR.CO.ID

P : Berapa minimal running pelatihan ini ?
J : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta

P : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
J : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien

P : Dimana saja pelatihan biasanya di selenggarakan?
J : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia

P : Apakah bisa diselenggarakan selain di kota lain?
J : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas

P : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
J : Bisa diselenggarakan secara IHT di Perusahaan klien

P : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
J : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.

Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk Melakukan Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftarkan Pelatihan, Dapatkan Promo Menarik Bulan Ini.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running